Broadcasts require a 2nd TX
I’m having an odd problem with Broadcasts
Rig info:
Yaesu FT-710, Flrig 2.0.06, Windows 10 Desktop
I run mostly in Emcomm mode and have noticed that my <EC> weren’t getting responses when I knew for a fact that others were hearing them. Digging deeper, I validated with with multiple operators that they can “hear” my transmission audio but it never decodes on their side.
I then learned that if I send a second duplicate <EC> it will decode properly by those that can hear it and they will respond.
Further testing, I’ve found that the same applies to other broadcast messages that I send. The first one is never decodable at the other end, but the second duplicate that I send is decoded.
My next step is to move my radio to a different PC and try to see if the same problem occurs.
Has anyone seen this problem or have any ideas as to what could be causing this?
It’s not a problem for anything but broadcasts. Peer connections and pings are work without issue.
It does sound like a delay in your PTT kicking in occasionally. I heard some sounds like this on the band. VARA requies fast PTT enablement. This is why VOX is not a good option (I assume you dont do that). It can also be over modulation on transmitting. Best to enable MONITOR on your rig and hear the actual sound. and see if you hear the sound cut off at the begining.