With each change of frequency, it is necessary to go to the Settings - SoundCard... configuration and press the Tune button (red) of the Vara, to connect the equipment.
Is it possible to have that button on VaraC itself? I don't know if it can be done in another way, but I think it would be much easier.
Thank you very much, Irad. Updated.
I didn't know that Jose Alberto had updated the Vara.
A hug and thank you very much for the effort to improve this excellent program.
Pre requisits says vara v 4.6.2
Obviously, with the PTT ON ;)
I am happy with the modification for the TUNE button, but it does not work for me.
I use the registered version of Vara 4.6.1 and version 3.8.8 of VarAC.
With the OmniRig I can also work, but the TUNE is not activated either.
I'm sure I'm doing something wrong.
Can someone give me some indication?
Thank you very much. It is a fantastic program.
Access to the power level function, via the CAT would also be useful , to allow setting carrier level from the App and form part of the Tune process , with a option to store the power required for Tune
store working power
load tune power
load working power
I will allow in future version a TUNE option directly from VarAC. This will be allowed as I talked to the VARA modem author and he will add the possibility to tune it using a command that VarAC will initiate.
Keep following VarAC updates to know when it is released.
Have you experimented with the VARA HF setting called "Tuner Enhancement"?
Yes, of course. It is automatically tuned as long as the SWR is less than 3. Otherwise, an external Tuner is needed. For tuning, it is convenient to use low power. The process is easy with the red button on the Stick.
I am still not following why you are needing to do this? Does your 7300 not auto tune? Mine does.
Hi and thanks. Maybe I haven't explained myself well. To change frequency, I have to turn down the power and tune. Usually with the automatic tuner of the IC-7300. To do this, I press the red button on the Vara (Settinsgs, SoundCar...). The question was if it is possible to have such a button on the VaraC. Irad told me no.
Agustín, why are you hitting the Tune button, should be no need for VarAC and VARA HF to work.
It is understood. Thank you very much, Irad.
VARA modem is handling audio. So the tune must be done through the VARA modem.