To test this feature, visit your live site.

Unable to decode any messages.

I am able to use FT8 on WSJT-X and I am able to use Winlink with VARA HF to send and receive email. I registered with VARA HF.

But with VarAC I am not able to see any decoded messages or CQ etc.. I see activity in the VARA HF waterfall and I hear my outgoing beacon or CQ on another radio. I also don't see anything happening when putting monitor on in VARA HF.

I do hear a lot of digital signals on 14.105.70 so there seems to be activity. I am using the same VARA HF settings for sound card as my Winlink Setup.

Thank you for any help.

Joseph

W4XPP

14 comments

Comments (14)

NC3Z Gary

Jul 30, 2022

You should be using USB-D, but you did not mention what your Rig is.

jel100us

Jul 31, 2022

Replying to

I did not have time today to figure out the native 991a Soundcard and continued with the Signalink. Will work some more on that tomorrow. I am transmitting directly through the 991a and using the Signalink for receive only. None of the other Audio Device Inputs do anything. Perhaps I have the 991a set to output through the Data Cable rather than the USB cable.

The changes I made were based on the pdf you supplied. I did have the Other Shift at 1500 and Other Disp at 1500. The changes I made were setting 29 and 31 to 38,400. Setting 33 to Disable. And 62 to Others. All other settings I had the same.