Hello all,
I try to use VaraC remotely. That means modem and TRX are located in a remote QTH whereas
the VaraC appliatzion is installed locally.
Everything seems to work ok except the SNR reports I send to my qso partners. VaraC generates strange values like -152 or + 48 which for sure are no credibles dB values..
I estimate it is a latency problem between modem and application ? The rig is a FT991A VaraC version is 10.2.1
and the modem is version 4.8.9.
Does anyone have an idea if this problem could be fixed ????
VY 73 Andreas DL2EAD
Sharing some screenshots of the modem and VarAC plus the SNR readings as they appear on the VarAC screen (under the vara log) section would be beneficial/
73s
Good morning, Andreas. Are you using Vara HF or Vara FM. You don't mention this in your post. If you use the wrong "modem" or RA board, you get the same weird readings and has nothing to do with the FT991. There will be an indication however in the S/N gauge read out if you are in the wrong mode. Hopefully, this solves your problem. Succes.