Omnirig with FT-891 issue:
VarAC V7.0.8, Log4OM V2.27.1.0 and Omnirig V1.20
Configured VarAC to use Omnirig with or without LOG4OM running - PTT Configuration TEST works OK, but Frequency Control Test doesn't work for me.
CAT configuration works OK.
Any comments.
FYI, I run Omnirig, Log4OM and WJST-X concurrently with no issues.
Issue with Omnirig here also. This time it's for the TS590S - recommended setting for the (not very widespread) FX-4CR transceiver. Direct control works fine. As Omnirig works e.g. for several FT8 clients + Log4OM it must be VarAC. Trying to set one of the pulldown frequencies - nothing happens. When hitting the PTT command the Omnirig Settings screen comes up. Error message contents provided below.
VarAC 7.3.0 73
************** Exception Text **************
System.Runtime.InteropServices.COMException (0x80080005): Retrieving the COM class factory for component with CLSID {0839E8C6-ED30-4950-8087-966F970F0CAE} failed due to the following error: 80080005 Server execution failed (Exception from HRESULT: 0x80080005 (CO_E_SERVER_EXEC_FAILURE)).
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) ........ etc - rest deleted as not to make thread too messy
Please do this:
1. Enable debug mode under settings
2. Go back to the main VarAC screen and do a frequency change through the dropdown
3. Send me a screenshot of the VarAC screen afterwards
4. Send me the VarAC.log file for inspection
5. you can now disable the debug log
my mail is iradirad@gmail.com
When you change frequency on the VarAC frequency dropdown, it does not change it ?
Can you share the VarAC settings screenshot ?