Hello, I have noticed that changing frequency from the drop menù will change frequency in both VFO A and B in my icom 756 pro2, while only the VFO A should be modified without affecting frequency and mode set in VFO B.
73 de Phil, iz1fks
top of page
To see this working, head to your live site.
Comments (15)
Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page
problem solved thanks to Irad and some troubleshooting with packet CI-V sniffing. icom 756pro2 .ini file used by omnirig need to be modified:
[pmFreqA]
Command=FEFE64E0.05.0000000000.FD
Value=5|5|vfBcdLU|1|0
ReplyLength=17
Validate=FEFE64E0050000000000FD.FEFEE064FBFD
[pmFreqB]
Command=FEFE64E0.05.0000000000.FD
Value=5|5|vfBcdLU|1|0
ReplyLength=17
Validate=FEFE64E0050000000000FD.FEFEE064FBFD
direct single VFO command to set frequency is not supported with IC756pro2/3 but a selection of the VFO A or B is performed by VarAC, anyway it is necessary to modify [pmFreqA] ( and optionally [pmFreqB] sub vfo) in order to be able to use single VFO option in Varac setup window.
73 de Phil, iz1fks