USB-D is changing to USB-RTTY mode. Resolution: Look for the FT950.ini in C:\Program Files (x86)\Afreet\OmniRig\Rigs Search for [pmDIG_U] and change from MD09 to MD0CAll fine here now!73
NC3Z GaryJan 05Good deal, that is the nice thing about OmniRig, you don't like what it says to your radio, you can just change it.
irad dJan 05Thank you @mahil . I moved it to the troubleshooting sections in this forum so others can learn from your experience.
Robert MuirJan 15Getting no tx output with omnirig, rig switches to tx but no poer out. ft950 microham usb interface, no issues with ft8 etc, using same set up vara only works in "use DTS/RTS"any pointers ? 73 de ei3grb
Great!
Good deal, that is the nice thing about OmniRig, you don't like what it says to your radio, you can just change it.
Thank you @mahil . I moved it to the troubleshooting sections in this forum so others can learn from your experience.
Same solution for Icom users ?
Yes, but the IC-7300 has one called IC-7300-Data that fixes it for the 7300.
Getting no tx output with omnirig, rig switches to tx but no poer out. ft950 microham usb interface, no issues with ft8 etc, using same set up
vara only works in "use DTS/RTS"
any pointers ? 73 de ei3grb
Are you working with VARAHF 4.5.0 and higher ?
yes latest version