Using VarAC 11.2, Windows 11 (native), CAT for Icom 7800. Start at slot 1 and the slot space is empty. Use the slot slider to browse up or down, and eventually it gets confused. On 20 meters VarAC thought slot 1 was 14.105075. The only to correct the sequence error is to select the proper frequency from the dropdown for bands. Not that this is significant, but I only discovered this behavior when one of the OTH radars was active and I needed to know which slots were clear.
The real culprit appears to be the slider still processes up and down requests while a previous move has not fully completed.
If you need debugger logs on this please let me know what to switch on. I think I can reproduce this on demand without much trouble.
Doug / N3JXB
Thanks Doug for the clarification and detailed information. I tried to simulate it while playing very rapidly with the <- -> keys and was able to to reproduce. So I would need some additional information to try and get to the bottom of it.
When that goes out of sync as the screenshot shows - when you now go -> it adds 750 hz as if Slot 1 is not 14.107.250? or revert back to 14.105.750
When it goes out of sync - what does the CF textbox shows as a CF when you now move a slot up ?
Can you simulate it again and send me a debug log file ? enable the debug under Setting->Misc.
Yes/NO: Do you have Rig control in place and do you have READ FREQUENCY every 2 seconds enabled ?
Thank you
Irad