I don´t know it that is really a bug but i could not get it done correctly.
So, i use an Icom 9700 for the QO100 SAT operation with VaraC and the latest Rig Control file.
In general it is running. BUT for the PSK Reporter and logfile, the settings are wrong.
My Icom 9700 is running on 23cm to the upconverter. So i have configured it with the Frequency file and the TRX also the program is following the frequency now and working fine.
But log, PSKreporter and will see that as 160m does not matter if i add another .000 in the frequency file or not.
Please also think about an "virtual offset" what you can set like WSJTX. The real frequency where i´m sending is 2.400.105 MHz.
With this settings, my Icom will work without any problems on 23cm to the upconverter (TX 2400 MHz from upconverter) and the log is 100% correct also the Pskinforeporter for TX on 2400 MHz.
Further Information regarding the virtual offset:
73 Andre / DL4QB
Thank you for reporting the bug.
it is now fixed for upcoming version. Here is a screenshot with a 23cm broadcast.
Please note you will need to use the format 1.XXX.XXX.XXX in the frequency file.
As for your offset - I will move this thread to feature requests.