Hi
I am 75 years old, not a pc wizard but would like some help please.
I am keen to use digital.
I use an FT897 along with SCU17 interface.
I cannot use the CAT facility that the programme offers and can’t configure the software rig and modem set up procedure.
The SCU uses a standard and enhanced port drivers on ports 3 and 4 ?
Can I use OMNIRIG or FLRIG if so could someone advise me as to the settings I need to apply.
Thank you.
Will attempt to help but I have a big concern with the statement you made saying "I cannot use the CAT facility". You can still use VarAC without CAT but it will have to all be manual.
Yes VarAC does support OmniRig and FLRig very well.
But can you explain more what you need help with?
Marie,
While I cannot help you as I run a very different set-up I wanted to congratulate you on your efforts. Yes, at 75 learning is a bit harder. Don't I know it... I will be 80 this year. Marie.... PERSEVERE. There must be folks out here that run a similar set up to you and will be able to help. While I do not run either of them... I hear great things about Omnirig and FLDIGI and it should be easily possible to get your set-up working.
TO ALL OUT THERE: ANYONE CAN HELP Marie with his setup ? Should be relatively straight forward.
Many thanks.
Albert. EI7II.