Now that rev 9.1.0 added 2m and 70CM bands, and multiple types of VARA for each, it would really be helpful if there was a path setting for each VARA TNC type. Currently it seems that changing from VARA HF (SSB), then to VARA FM, requires the path for the EXE to be changed.
And I can see the need for changing bands and modes to automatically close the TNC and open the proper TNC when there is an appropriate change.
Doug / N3JXB
It occurs to me that you should then also be able to specify the respective modem and the device settings (USB, USB-D, DATA-U, FM, FM-D) in the frequency planner.
That has a pretty big impact.
Hello,
I would also like it if the paths from the individual modems (HF - FM - SAT) could be stored permanently in VarAC.
When you make the modem type in the VARA modem configuration, you also choose the right modem.
It's not always easy to make sense
1. select the type above
2. to select the path and exe to explain.
73 Thomas DL5BCA
Read about VarAC profiles. under settings --> switch profiles.
or alternatively - click the profile name at the top of the VarAC console (main screen)
This will open up a dialoug with explenation.
Every profile can lead to a different VARA modem type.
And switching between profiles is easy
73s
Irad