To see this working, head to your live site.

VarAC Freq busy light never turns off

I am trying to setup up VarAC with a IC-7300, and the Freq busy light is on all the time, and if I try CQ or anything else, it says waiting for freq to clear. I would appreciate some help. Thanks in advance.

11 comments

Comments (11)

AA5UN Marty

Jun 28

I had this same problem with a yaesu FTDX. I was able to solve the constant busy by varying the filter width. There is a sweet spot around 2000 to 2200. But adjust and watch and the busy light will go out and the program works.

Chris Dekker

Apr 20

After VarAC had functioned flawlessly for several months, I had this problem too for a few days, but after turning off the NOTCH, NR and NB the problem was solved.

wd9dui

Jun 04

Replying to

thanks for the tip, works fine now... 73 Gary

Frederick Carlson

Mar 16

This seems to be the first big hurdle to getting this system up. I fixed it by using the SFT function in my Yaesu 891 rig. I do not know what other problems that caused however.

Edited

NC3Z Gary

Mar 16

Replying to

How about using the menu settings I suggested????

AE2WM-Bill

Jun 16

Replying to

I tried setting both to 1500 as you suggested on my FT-891, but it made no difference. If I changed the PSK frequency to 1500 from 1000 or shifted the IF up 500 Hz, the noise band would move into the red-lined area, but then other things didn't work, like the TX signal. I'm baffled. I have no trouble using Winlink with VARA HF or using FT8, but VarAC has me baffled.

wd4kav

Mar 16

On my 7300, I set a filter to 500 Hz, and choose the option in vara-hf to allow 500 Hz connections, and it's. Centered automatically

NC3Z Gary

Mar 07

You have weird notch taking out all the data. That is the problem.

wd4kav

Mar 07

What filter width are you using? Here's what VARA-HF should look like with the filter at 600 Hz. 73, Joe

Frederick Carlson

Mar 15

Replying to

How do you move the filter. I have a similar problem.

wd4kav

Apr 21

Replying to

I'm not sure how you ended up with that receiver noise UN-centered. Make sure you have your "twin Bandpass Filter" turned off, and have a 600 Hz filter set in the 7300. You can do this using one of the filter settings in the VarAC_cat_commands file that runs when you first start the program.

Edited

Forum: Forum