Thanks... But that kind of defeats it automatically logging. Operator and Station are 2 different callsigns... Operator = Me(or Other Club Member) and Station = "Club Callsign" is Fixed. They are defined in ADIF Spec

Seems strange that VARAC will not work.?? Tell us what actually is not working..?? A Big difference with VARAC it is not proccessing the Audio. Have you set VBAudio Cable as the Audio devices in VARA-HF Modem(s).?

Hi Irad.. Many Thanks... Most people won't "add" VHF Frequencies, so they will not see the options. If the logic only offers the "shorter" options for frequencies > 30MHZ. On VHF openings times during ES's and Tropo can come and go quickly. So for "probing" for openings it would be helpful But I understand... 73 Dave G8LIY

It's an unfortunate use of Terminology. The control(ALC) actually adjusts Audio Drive You see the same effect if you go into Audio Control and turn it Up/Down The ALC "Meter" just shows you the Result of Turning Up/Down Drive Ever since PSK31 came out in 1998 I set Radio to 100W, and adjust Audio Drive to 10~50W The PA is biased for optimum, and you get a very clean signal On most Radios, ALC just starts to show from @ 50~60W, I like Zero ALC

From Region 1 Band Plan IARU Region 1 144.550 is for Wider ~ 20khz "Analog & Digital" based MGM 500Hz MGM would typically be around 144.100 ~ .150 ( 144.145 could be used.? ) 2.7khz MGM would typically be around 144.150 ~ .400 ( 144.155 could be used.? ) (( FT8 is 144.174 )) FM is in the range: 144.8000 ~ 9875 But is Typically: 144.9250 ~ 9625 ( I have seen posts on FB indicating VARA on 144.950)

Hi Gary.. Strike this one up to PSKReporter Delays I just re-checked, and guess what... now showing... Thanks for your help...

Here it is... Thanks

Hi Gary, Configured by the .ini Now just need some signals to test it on :) Many Thanks

Hi Gary, Many thanks... Will look at the .ini file and see if its obvious I can look at the Current Modem for Reference. Dave ~ G8LIY

Hi Gary, Did you see my question about how to config above Thanks... Dave

Hi Gary, Many Thanks... Do I need to run the 2nd modem standalone 1st to configure it. Then let it start with VARAC from then on..?? Thanks... Dave

Hi Irad, Many Thanks for confirmation... I will do this tomorrow. I called Yaesu Tech Support in the UK I asked about using CAT Commands to set "USB-D" & "Narrow" & "500Hz" You can do it manually on the Radio settings They are not sure if it is possible via CAT, CAT F/W Issue or Documentation Issue They will get back to me. 73 Dave

Hi Folks, I'm back... Just a bad period of chronic fatigue, on a plus side, I didn't have that much hair to loose because of Chemo... O.K, I want to try this alternate method of CAT, instead of OMNIRIG. First Challenge/Question... When I currently start VARAC, It automatically starts OMNIRIG If I now want to use CAT, Do I need to "kill" the OMNIRIG process 1st Then go into setting and reconfigure..?? Thanks... Dave

Hi Folks Really sorry... Just be really fatigued/washed out... Matt, Thanks for your help/input/support... I did a Google, I found a post that showed MD with 1 character They had for example MD2 to change to USB, not MD02 Maybe..guessing?? MDC;NA1;SH03 I hope to get on this tomorrow... Dave

Irad... Sorry not had a chance to test yet... Suffering from Fatigue after Chemotherapy. Maybe tomorrow. I will first need to re-configure, Currently I'm using OMNIRIG. Dave

Hi Gary, Many thanks for this... It's late, and I'm fatigued, Chemo side effects 😴 I will get on this tomorrow First I will create a copy of existing working OMNIRIG based ini file. Then take a look at the contents and compare with your entries. But from what you said, I think I will need to drop OMNIRIG and re-configure VARAC for direct CAT control of the FT-991A Cheers... Dave