Hello All and Irad, it looks like VarAC is designed for more bands than HF only, so I set up 2 transceivers on 2 meters using Vara HF. Note: both transceivers have a correct rit/clarifier setting to be within each others rx-'window'. The first problem I'm experiencing is that using a QRG of 144.385 MHz (set in VarAC_frequencies.conf), VarAC sets it to 144.384.990 and 144.384.992, so that's a few Hz off. Maybe that's because the frequency is >= 100 Mhz with an extra digit now? Or there is a CAT error; used trx's are a Yaesu 817 and an Icom 9100. The second problem I'm having is that a QSY Up 1 kHz with te #-button does not change frequency on either side, producing the error (also on both sides): 05:47:49 - Error: Unable to parse QSY freq: De indeling van de invoertekenreeks is onjuist. bij System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) bij System.Number.ParseInt64(String value, NumberStyles options, NumberFormatInfo numfmt) bij System.Convert.ToInt64(String value) bij VarAC.VarAC.write_data_stream_log(String msg, Color clr, Boolean with_timestamp, Boolean with_newline) (sry about the Dutch) There is no problem qsy-ing with the Up and Down buttons and changing frequencies. Noted: I'm Down 750 Hz now, the QRG should be 144.384.250, see my first problem. That is perfectly ok because I started off at 144.384.990. Thank You and Cheers, Jan PH3J.

Hello All and Irad, I am running VarAC 5.1.8 and there are some GUI font errors. The same thing was happening with version 5.0.2. I guess VarAC uses mij built-in windows font which produces incorrect characters for arrows and such: This happens with windows 7 64 bit Dutch version. Maybe you can embed the correct fonttype into the executable and use that Irad? Thank you and Cheers, Jan PH3J.