Bo, like I can read on the QRZ.com page is that you have an IC-7300, if so, then please read on the page 124 of the VarAC manual in English This info is from K5CG 73 de Pat ON2AD

Hi Dieter, the same here after your post I have done the test and yes I also have seen this problem.

Hi Albert, These files are very small, and the advantage is that you can always go back to files that are not broken or damaged, which can happen from time to time. A routine can also be built into the Backup so that only, for example, 40 different backups are made and that the 41st backup deletes the very first. All this only takes a few seconds. I also have this routine in MixW3.2, this file was created by Colin 2E0BPP at my request. 73 de Pat

So I can see all my sending Info in the Currently sending So I can see all the info I'mnjust typing into the New message window

Done 73 Pat

Irad, 3.105.000 is out of band

Please use this Forum for help someone, then sometimes we can use this help for add it to the manuals. 73 de Pat

Hi Irad, This already looks promising, but anything related to eQSO, LOTW and Clublog should NOT be uploaded directly to them. Their boxes should only contain "R" for Request. the upload to eQSL, LOTW and Clublog can be configured via DXKeeper via: Config / QSL Config /eQSL, LoTW or Club Log. And about the Power: add a field for the PWR in the main page of VarAC or add a PWR in the menu Rig control and VARA configurations. Then the PWR can be included in the ADIF file and forwarded to the Logbooks Then also like to use the Commander to deploy it. And also the "HRD commander" Thank you Irad for the nice work 73s de Pat

Hi Irad, As you can see in the videos, if I have a Callsign in the CALLSIGN box (log from VarAC) then it doesn't pass to the Filter box of DXKeeper (DXK). Once this is included I would have to show all the QSO's (in any mode or band) in DXK but this happens automatically as you can see in the video. For DXKeeper this would already be a big improvement. If I save the QSO Automatically or manually in VarAC then this should also happen in DXKeeper which is already happening, but the Power, the address should also be filled in as can be clearly seen in the videos. Also the box via which displays the QSL route with info from the selected Callbooks in Config/Callbook panel. Maybe if you can achieve this then we are as far as we are. Then please also use the Commander and possibly the Ham Radio Deluxe "commander" instead of the OmniRig, or the Transceiver own interface. Because there is already demand for it from various users. I hope to have given some clarity regarding my many wishes hi... Did a QSO yesterday with: PY1SAD at 15M at 15:22 UTC -10 him and me -13 - 9,374.95 Km But in the CALLSING box, the following Callsign kept popping up: ZZ1M/PY1SAD/P But QSO is OK Then again at 30M with DK1QG 16:52 UTC -01 he +02 i. 431.94 Km Sorry for the lot of work I give you. 73 de Pat

Hi Bernard, Go to the Menu Settings/Rig Control & VARA configurations Take a look at the File Transfer there you can select your own Incoming and Outgoing files directory. And all this info are in the German and English manuals 73 de Pat ON2AD

Hi Irad, Thanks you for add some utility's from DXKeeper to VarAC. I have create two movie's so you can see what are my mind of add for DXKeeper. (I had to reorganize my programs from two screens to only one, but all what need is visible) 1-QSO-In-DXK.mp4 This movie will let you seen that when I click on a Callsign this callsign also move to DXK and now I will see all the QSO's I have done with this specific QSO. 2-QSO-Saved.mpg This movie will let you see then when I have save that QSO in JTDX it's also save it in DXKeeper and fill in all the other fields like you can see. But I think that when you have problems with this all Dave the author of DXLab Suite can help you fuhrter. Many thanks again Irad. 73 de Pat ON2AD

Hi Ezio, This only for Winlink use: FT-991A connected with the USB cable If you will use the DATA-USB modus : Set the FT-991A menu 72 on USB 109 on DATA Set the FT-991A in DATA-USB modus If you will send in USB modus : Set the FT-991A menu 72 on DATA 109 on USB But for both settings see that the OmniRig are not in one of the used COM ports. Now my Settings for use VarAC FT-991A connected with the USB cable If you will use DATA-USB modus: Set the FT-991A menu 72 on USB 109 on DATA Set the FT-991A in DATA-USB modus If you will use USB modus: Set the FT-991A menu 72 on DATA 109 on USB I hope this will solve your problem. 73 de Pat

Hi Ezio, And here my settings of the FT-991A menu with use only the USB connection and OmniRig. For using the FT-991A with only the USB connection you must install the Yaesu drivers Go to Yaesu's website select the FT-991A click Files and download the FT-991A / SCU-17 USB driver (virtual com port driver) After installing these drivers, two com ports are created The Enhanced COM Port is used for CAT control. The Standard COM Port is used for the TX (the COM ports may be different from those in the example) You can view the installed COM ports in device manager I will this add to the manuals. Hope this will solve your problem 73 de Pat

Hi Ezio, I to use the FT-991A with the micro KEYER II as interface and it's work in USB and DATA-USB modus. Here my settings of the FT-991A menu with use with the micro KEYER II and OmniRig I will this add to the manuals. For the VARA setup and the Omnirig and VarAC setup see the manuals I wrote Hope this solve your problem 73 de Pat

Hi Irad, OK, but why not the RIG ? Now I use a FT-991A but I can also use a TS-2000 or IC-703. So this RIG info is also a indication for whish RIG are this settings. 73 de Pat