Hello Irad. Varac is now working very well. Many thanks for your effort!! Super!! 73, Marcel, PE1LUP

Hello Irad. The "Unattended Links" button is off. See the PDF "PE1LUP Main Screen 2025-06-08" as an attachment. I have also added the file "INI File" as an attachment. There you can also see that "Unattended Links" is set to "Off". 73, Marcel, PE1LUP

Hello Irad, Thanks for your comment Varac worked fine for 8 hours yesterday but then it went wrong again. The message "Ignoring PTT request by the modem etc......" appeared again in the Varac.log screen. After that, transmitting was not possible. See also the PDF attachment (section Varac.log) 73, Marcel, PE1LUP

Hello Irad. I changed Linux Compatible Mode=ON in the VarAC.ini file. After about 8 hours (Varac is on continuously) the problem is back unfortunately. 73, Marcel, PE1LUP

Hello Alister. I have just send you an e-mail. 73, Marcel, PE1:UP

Hello Jurgen. No, not specified for 2 meter and 70 cm

I have here the IC-7300 and IC-9700 and both I'm using OmniRig because CAT does not work here. Strange i think

Hi Dave. In the setting PTT at VARA I use PTT via CAT, COM 4 and 9600 Baud. At OmniRiog I use COM 7. In the setting of Soundcard of VARA the IC-9700 sent a tone if I use the knob "TUNE". That is Oké. In the setting of VarAC I use always OmniRig. FM-D and of course VARA FM. All is working now. 73, Marcel

Hoi Erik. Zie jouw mail. 73, Marcel

Hi Irad. When I put the rig in USB nothing happens at all. Only USB-D

Hi Irad. Here are the two screenshots.

No, according to Varac's display I work at 14.105 Mhz and that can also be seen on the display of the set IC-7300,

Hi Gary. When Varac is transmitting, you can hear the beeps on the IC-7300. Just not on 14.105 Mhz. Only on 14.105 Mhz. Other freq are all perfect.