Works here but seems to send report after changing freq or band. My case I change then do some CQ and return to the band I want to stay. Have dipole down so some limited test with 2M 70cm. 73' Edfel KP4AJ

Not sure if Randy will agree with this suggestion: Make the TO also possible to select multiple recipients. How many not sure. Sometimes you may want to send same Broadcast message to several stations. 73' Edfel KP4AJ

Hi Michael: Observed same but noticed the PSK report freq after changing. For example, I am also very interested in 6M FM for EMCOMM and setup 50.345. When I change to 50.330 for example PSK Reporter shows the previous freq. Not sure if it is a bug or is the way VarAC send the info. 73 Edfel KP4AJ

Agree it could be good.

Thank you Oliver. I am mostly interested in a freq for local NETs was looking for suggestion 10m and 40m. Broad Nets could be more complicated, my opinion. 73! Edfel KP4AJ

Thank you!! Did was happening with my FTDX10 after changing from FT8 to operate VarAC. It was keeping the Split Setting. DTR/RST enable is the fix. 73' Edfel KP4AJ

HI: Anyone doing 6M VarAC FM with a Yaesu FTDX10? Doing some experimentation, have cat control and PPT works. VarAC rig settings I can select FM-D, still yet have to verify with local functionality test. Key is to determine signal is going out properly and received as well. 73' Edfel KP4AJ

Verified, QSO gets logged! Auto Log working.

Here from INI file: [RIG_COM_CONFIGS] ControlMethod=COMPORT TCPHost=127.0.0.1 TCPPort=60000 ComPort=COM8 BaudRate=38400 DataBits=8 StopBits=1 Parity=None DTR=L RTS=L PortWaitTimeMs=100 RigPTT=Yaesu FTdx-10 RigFreqControl=Yaesu FTdx-10 [RIG_CONTROL] RigPTTControlType=CAT RigFreqControlType=CAT RigCatFreqRead=OFF RigCatFreqReadIntervalSeconds=2 SafetyPTTOffEveryMinute=OFF PTTDisableAfterFreqChangeSeconds=0 FrequencyOffsetHZ=0 ActiveAntennaTunerFreqChange=OFF UsbMode=USB-D FrequencySchedule=OFF FrequencyScheduleCustomFilePath= FrequencyListCustomFilePath= LastFrequency=50.330.000 LastFrequencyLoadUponStartup=ON [RIG_OMNIRIG_CONFIG] Rig=1 VFO=A+B [RIG_FLRIG_CONFIG] FlrigHost=localhost FlrigPort=12345 [DTR_RTS] ComPort=COM1 Type=DTR Hope this helps. 73' Edfel KP4AJ

Hi: Below I include my FTDx10 VarAC settings. No HRD here. Hope you find a fix. 73' Edfel KP4AJ

Roger!! Thank you Irad! :)

Interesting! So...VarAc could be used within an AREDN MEsh network, seems. 73' Edfel KP4AJ

Hi Lyn make sure you have enable to see hidden folders. Check attachment. Probably a VarAC install setting within Windows installer. 73' Edfel KP4AJ

Hi: Bob, good find!! Stilll a bug as default VarAC states: C:\Program Files (x86)\VarAC\VarAC_qso_log.adi not sure why location is different. Excellent Bob!! Was worried my QSO info was lost. 73' Edfel KP4AJ

Hi: Noticed this here too. My settings not send QSO to any app, but adi file should be created and it is not. Expected behavior adi file get created and QSO info is recorded. No happening here. VarAC 8.06. 73' Edfel KP4AJ

Hi Irad: I suggest to release a 7.1.5 version noting this critical fix. Some people download straight the app and may not read the forum. 73' Edfel KP4AJ

Hi: You use VARA (FM or HF) screen to have access to signal. VARA signal screen output is very different than the FT8/FT4 waterfall, but is a matter of getting used to it. Or... see if VARA developer implements something in that direction. Interesting question. 73' Edfel KP4AJ

Roger that! Back to 6.6.13. 73' Edfel KP4AJ

Irad: Comment about the DropDown Edit frecs -- which is excellent. I think VarAC should do a reboot after user do a edit so changes are processed immediately. Otherwise it will depend on the user doing the VarAC reboot. Not a big deal. Thanks for the effort, time and work being done with VarAC!!! It is highly appreciated! 73' Edfel KP4AJ

Hi Irad! Working now as expected!! Thanks. 73' Edfel KP4AJ