OK with that, thank you, Irad. Vy 73, Alex - DH2ID

Hello Irad, thank you for your answer. I test by sending into dummy loads with only milliwatts on the air, which works well. My VARA version is licenced, of course, but I have only this one callsign :-) which I can't connect to. Other callsigns are not licencend and would severely curb transmission speed. No big problem, but I can't licence another VARA version for my own call...

@K7EK, Gary Please dowload the newest rig.ini files and copy them into your C:\Program Files (x86)\Afreet\OmniRig\Rigs folder. The dowload is here: http://www.dxatlas.com/Download.asp Look for "INI files for OmniRig". It would also be a good idea to update to the newest OmniRig version updated 2021-09-11.

My CI-V baud rate has always been 19200, with CI-V USB baud rate set to 115200. This setting works well with VarAC.

In OmniRig choose "IC-7300-DATA"

My fault - I put the files in the x86 folder, not in the 64bit programs folder. I mistakenly thought that the had to live where all my VARA files live... in the x86 folder... Sorry, all seems to work now....

https://www.dropbox.com/s/9p18zojpwvqvpk7/VarAC.log?dl=0

Here is a new dropbox link. Uploading any files to the VarAC forum does not work. https://www.dropbox.com/s/304kut4hs6xb269/JIT%20Debug.txt?dl=0 I think that VarAC itself is ok, the crash being probably caused by a MS .NET component.

Where do I find these logs? VarAC does not produce any crash logs with DEBUG=ON. The only crash log is the one I sent you above.

https://www.dropbox.com/s/lo9lsi1y3hbp61r/VarAC.zip?dl=0

Thank you, Irad! Vy 73, Alex - DH2ID