Newbie here.. I have PTT working via CAT on my FT-950, but no frequency control. I did download the latest CAT ini file. I put it in my VARA folder. Any suggestions?
Enable the debug mode in the settinga menu. Go back to the main screem and try to do some ffequency changes on the drop down. Disbale the debug mode and send me the varac.log to iradirad@gmail.com.
That worked perfectly! Thank you very much! I will post this on the Facebook group as well.
Thanks
in the CAT ini file - look for the FT-950 section and change this from B to A:
Let me know if it works
Irad
[Yaesu FT-950] CmdType=TEXT PTTOn=TX1; PTTOff=TX0; ModeUSB=MD02; ModeUSB_D=MD09; ModeFM=MD04; ModeFM_D=MD0A; SetFreq_Data_method=TEXT SetFreqVfoA_Cmd=FA{}; <---------------------------- CHANGE HERE from FB to FA SetFreqVfoA_param_length=8 SetFreqVfoA_hz_res=1 ReadFreqVfoA_Cmd=FA; ReadFreqVfoA_Result_Data_method=TEXT ReadFreqVfoA_Result_hz_res=1 ReadFreqVfoA_Result_Length=11 ReadFreqVfoA_Result_Freq_Start_Pos=3 ReadFreqVfoA_Result_Freq_Length=8
TNX..file sent. and the ini file is in the VarAC-V3-8-8 directory
Enable the debug mode in the settinga menu. Go back to the main screem and try to do some ffequency changes on the drop down. Disbale the debug mode and send me the varac.log to iradirad@gmail.com.
Just to make sure u put it in the VarAC directory. Right ?